2025 Audi RS6 Performance Wrapped & Coated by Premium Auto Solutions in Montrose, CO

Full Vinyl Wrap & Ceramic Coating for a Brand-New 2025 Audi RS6 Performance

This RS6 Performance came to Premium Auto Solutions straight from the dealership, untouched and ready for its first layer of real protection. Handing over a new vehicle like this requires trust, and the owner made it clear from the beginning that quality, communication, and careful handling were the top priorities. Our team approached the project exactly the way we approach every high-performance build, with patience, precision, and a commitment to doing the work the right way.

Even though we protect plenty of performance models, none of them receive a “copy-and-paste” treatment. Every RS6 arrives with its own condition, ownership goals, and expectations, and this one was no different. The owner wanted long-term durability, a fresh new aesthetic, and the peace of mind that comes from knowing the car is fully protected before it hits Colorado roads.

With that in mind, we gave this RS6 a complete new-car preparation, installed a full vinyl wrap, and finished the job with a professional ceramic coating. This combination delivers a dramatic visual change while locking in long-term protection,  exactly what the owner was looking for.

Summary of Services Provided:

• Full exterior wash & decontamination
  
• Light paint refinement to prep surfaces
  
• Full vinyl wrap installation on all painted panels
  
• Professional ceramic coating applied over the wrap
  
• Final inspection, curing, and finishing touches

Our Protection Process for This 2025 Audi RS6 Performance

Working on a new Audi RS6 Performance demands a methodical approach. These cars carry wide fenders, deep cutlines, and aggressive bodywork that require steady hands and precise technique. For this project, our team at Premium Auto Solutions followed a full protection workflow to ensure the vinyl wrap and ceramic coating bonded cleanly and delivered long-term durability.

Step 1 — Deep Wash & Full Surface Decontamination

We began by giving the RS6 a complete decontamination wash to strip away transport film and dealership residue. A thick foam blanket softened dirt without touching the paint, reducing the risk of swirl marks before we began. We followed with an iron remover to dissolve embedded contaminants in the clear coat, making sure nothing remained that could interfere with wrap adhesion.

Around badges, grilles, and trim edges, we used soft detail brushes to dislodge hidden debris. After a controlled rinse, we washed the entire vehicle with pH-neutral soap using the two-bucket method. A clay bar treatment removed the last of the bonded particles, leaving the surface smooth under the hand. Once dried with filtered air blowers, the RS6 was ready for paint inspection.

Step 2 — Paint Inspection & Light Machine Polishing

Under high-output LED correction lighting, we evaluated each panel carefully. Even brand-new performance cars often arrive with light transport marring or dealership handling marks that become visible during wrap installation. To address this, we refined the paint using a dual-action polisher with a soft finishing pad, working panel by panel to level small imperfections.

This polishing stage is essential because vinyl film will reveal any surface inconsistencies beneath it. After refining the panels, we wiped the vehicle with a dedicated panel-prep solution to remove any residual polishing oils. The paint was now clean, corrected, and ready to receive the wrap.

Step 3 — Full Vinyl Wrap Installation

With the surface prepared, we moved the RS6 into our wrap bay and began the installation. Wide hips and strong body lines make this model especially challenging, so we approached each panel patiently. We flooded surfaces with slip solution to allow the film to glide into position without grabbing too early. Once aligned, we anchored sections using soft squeegees and carefully worked the moisture out from beneath the film.

Tight curves and sharp edges were shaped using controlled heat, allowing the vinyl to contour without overstretching. Every edge was wrapped and tucked where possible, ensuring clean seams and a near-factory appearance. The wrap settled smoothly across the RS6, giving it a fresh finish that transformed its presence immediately.

Step 4 — Ceramic Coating Applied Over the Wrap

After the wrap had time to rest, we prepared the entire exterior for ceramic coating. Vinyl film requires a residue-free surface for strong bonding, so we wiped down each panel with a coating prep solution. We applied the ceramic coating in a precise cross-hatch pattern to ensure even coverage, then leveled it using microfiber towels once the coating began to flash.

The coating enhanced the wrap’s finish, giving it a smoother, deeper appearance while adding hydrophobic protection. For uniform curing, we used IR lamps on the larger panels. This combination protects the vinyl from UV exposure, makes washing easier, and maintains the RS6’s finish long-term.

Step 5 — Final Inspection & Delivery Prep

To complete the process, we performed a detailed inspection around the entire vehicle. We checked every wrapped edge to confirm adhesion, reviewed the ceramic coating under LED lighting for streaks or high spots, and ensured all panels carried a consistent sheen. Windows were cleaned, trim was wiped down, wheels were polished, and tires were dressed for a clean, finished look.

Once everything met our standards, the RS6 was staged for delivery—wrapped, coated, and protected exactly the way the owner envisioned.

Final Result — How the 2025 Audi RS6 Performance Turned Out

Once the wrap was fully settled and the ceramic coating cured, the RS6 Performance carried a finish that looked clean, sharp, and completely uniform from every angle. The vinyl laid smoothly across the aggressive body lines, the coating deepened the sheen, and the entire exterior now feels far more refined than when it arrived.

The owner left with a performance wagon that’s not only visually stronger but also protected against Colorado’s sun, road debris, and daily wear. Smooth edges, consistent coverage, and a long-lasting finish, delivered exactly the way a brand-new RS6 deserves.